Freestanding filament spool holder
by JoannaK, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
With small printer like Huxley there's no point trying to bolt large filament spool at the side.. so I made this simple self-standing thingy. Originally I hoped the leg-parts alone would be enough, but this spool is a bit too large so I had to design those raiser feet.
I have used this with Ultimaker 5Lbs spool (4043D natural) and will make adjustments for others as needed.
Print two each, also have two bearing inserts http://www.thingiverse.com/thing:7475 and two 608:s.. Some 20cm of threaded rod (mine was M5) and washers+nuts.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Freestanding filament spool holder by JoannaK is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving JoannaK a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure JoannaK would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).