Kyosho Spider EP / TF2 belt gears
by SportsterDriver, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Gears for front/rear drive belt for classic Kyosho Spider EP / TF2 from the 80/90's chassis - the ones that get chewed up often when stones get in the drive train. These are not easy to find anymore.
Test printed on Ultimaker 2+ with ABS on a raft. Would reccommend trying without the raft as the bottom is a little distorted.
230C - Extruder Temp
100C - Bed Temp
0.1mm Layer Height
Recommend trying without raft and some supports. I would also recommend trying as a single piece.
How I Designed This
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Kyosho Spider EP / TF2 belt gears by SportsterDriver is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving SportsterDriver a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure SportsterDriver would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).