Cut-Stone Arched Doors have now been updated to meet the current standards of OpenForge.
For instructions on how to get started with OpenForge, we have a set of tutorials. Want to sell OpenForge prints? Want to use OpenForge designs in your product, check out the license FAQ.
OpenForge is now a patron supported project. I use the resources that my patrons give me in order to get the resources to let me create more sophisticated tiles with a greater level of detail. Please, support me, and I’ll deliver an ongoing stream of awesome gaming terrain. You can find more about OpenForge and Masterwork Tools at our:
Add door hinge
To add the door, I've been using a straightened large paperclip. put it in the hole, through the hole in the door, to the hold in the bottom of the tile, then pull up slightly and clip with wire cutters.
For each tile, print yourself one of cut_stone_wall.floor., cut_stone_wall.wall. and a base of the same size (1x1 - 4x4). The tiles are in inch square basis (which matches most commercial printed tiles). If you want that size, print without changes, and print one of the inch bases. If you instead want 25mm squares (The historical scale of OpenForge), scale the floors on X and Y or walls on X, Y and Z by 98.4% and print one of the 25mm bases. Finally, if you want wyloch style tiles (1.25" per square) scale the X and Y by 125%.
Note: All bases for OpenForge are kept in their own thingiverse entry: OpenForge 2.0 Bases
Other Cut-Stone Tiles
I've done two different paint styles for Cut-Stone:
- 3/20/19 - Added inch scaled versions of every part as a part of our conversion of OpenForge from 25mm basis to inch basis. Also moved to separate wall, base and floor. like other current openforge sets.
- 3/20/19 - Added wood grain doors