Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!

Diamond Hotend Mounting With Extra Attach Points

by LHartmann Mar 27, 2016
Download All Files

Thing Apps Enabled

Please Login to Comment

Made this today and printed perfectly, no issues at all mounted up my Diamond assembly with tieraps no real weight added either, now i am need of a part cooler but with the extra mount expect that wont be an issue. Thank YOU!

See the link in the description, I already made a part cooler for this mount. Someone also remixed it adding dual fans and height probe. Let me know when you print something with it. :-)

made both the mount and the fan shroud, for some reason the shroud fan dividers did not print (slicer3) repetier. Printed in PLA. Ordered a spare set having those printed in ABS, I have not installed a heat bed. (harder to find a large heat bed)

Except for the missing dividers on the shroud turned out perfect (won't need the probe as mine is mounted to the gantry.. Now i have to fit this to my Large home brew CoreXY Gantry, Thanks again

Hi friend... You have this in solidworks format ?
I need !

Part was not modeled in solidworks. You can, however, get openscad free and change the part at will. ;-)

Also, can't solidworks import stl?

Ok... Thanks Friend !!!
I import in stp file format, i found !!!

Hi what is the stl for the white part below the blower?

The white plastic parts on my pictures were not changed from the original. Check the "remixed from" link on the right (or bottom, if you are reading through a mobile) of the "details" page, you can get the STLs from there. I will probably change these parts in the future, though.

Hello! How to get the firmware?

I am not quite there yet, but look for Reprap Marlin. It does have multiple extruder support, and should only need a little tweaking of configuration.h.

Thank you! It was on my to-do-list to adjust this. Thank you for this!