6_2 Knot from SeifertView
by dennedesigns, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
A 6_2 knot designed by Candace Bethea and edited by Dave Pfaff and myself from my Math 341 Introduction to Topology class in Fall 2014.
You may need to rescale this object by a factor of 10 in Makerware since it is sized in cm not mm. You may also need to move the knot onto the platform, I think it is just above it. The knot is about 7cm x 7cm x7cm in size. This knot was first printed on a Project 260 3D Systems printer. Later, I printed it on the FormLabs 1+ printer in clear resin (02).
How I Designed This
The 6_2 knot was exported from SeifertView, then opened it in Cinema4D. The surface of the knot needed fixing due to overlapping polygons. This was fixed by deleting overlapping polygons, then filling in the gaps using the Stitch and Sew tool in Edge Mode.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
6_2 Knot from SeifertView by dennedesigns is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving dennedesigns a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure dennedesigns would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).