Bridging and wall test
by Shellduck, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
The bridge test was made to test the bridging capabilities and the difference compared to using support.
The bridges hags 5mm over the plate, is 3mm thick and 4mm wide.They span over a distance from 20mm to 90 mm with steps of 10mm
The wall test was made to test the precision of walls printed in two directions at a time. The thickness of the wall span from 0.25mm to 2mm with steps of 0.25mm.
The parts was printed on a replicator 2 raft.
layer thickness 0.2mm
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Bridging and wall test by Shellduck is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Shellduck a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Shellduck would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).