LULZBOT TAZ 40mm Fan mount
by stuarts, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
All of the fan mounts that were currently available limited the X axis, so I made this one. This mount bolts onto the underside of the stock x carriage and uses the same holes that the extruder does.
You may need to limit the Y axis a little, as the shroud comes really close to one of the bed mounts.
Lastly, the shroud is only 1 layer deep.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
LULZBOT TAZ 40mm Fan mount by stuarts is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving stuarts a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure stuarts would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).