Loading
alvaroalea

BabyNES Case for Raspberry PI 3 Remix

by alvaroalea Apr 2, 2016
Download All Files

Thing Apps Enabled

Please Login to Comment

Great Model, top and bottom both have a small non-manifold section though. The bottom is easy as it's just simply a missing face between a couple vertices. The top has some overlapping faces near the blocked off vent hole close to the flap opening, removing the blocked vent(as it is blocked and not venting anyway) and replacing with just 1 flat face fixes it. Otherwise all-in-all, fitment is great and the bolt together design is so much nicer and simpler than some of the snap together models, not to mention a lot less fragile.

What length of M2.5 screw is needed to fix this together?

hello

So, I recently picked up a CR10. I have printed one design that came with the product. The SD card it came with has one design pre-loaded. I noticed that the file name that I printed from was with a ".gcode" Your files that I downloaded ended with a ".stl"

Not sure if that even matters, but when I went to go print it, I could not choose it from the file menu, which I imagine probably means the software doesn't recognize the file.

I am new to 3d printing, and my computer knowledge is mediocre. Do I need to change the format, or is there something I was missing?

Any help would be greatly appreciated! TY

the gcode files are specific to each printer (more or less)
the stl files are are de 3d model. (generic)

you need a special software that convert the generic stl file to the specific gcode.

the software I use is cura, other software also valid is slic3r, you need to check the documentation of you printer to know what software to use. as I do not know CR10 printer.

In this sofware you define the material, quality and speed of the printer and other options that affect the quality and speed of the print.

This is a great model. I know that the screws are M2.5, but what is the length required to assemble the top and bottom?

Was wondering the same thing

Hello!

Really nice case you got here! I was just wondering, are the top and bottom parts somehow attached to each other or are they loose?

Keep it up!

Es la que mejor encaja con raspberry pi 3, sin lugar a duda. Después de 3 impresiones de diferentes cajas estilo nes, es la que mejor queda y encaja todo, Muchas gracias.

Is the best "nes style" case for raspberry pi 3. I tried to print other models (3 in total) but not fit perfect like this one. So, thank you so much for your work and deserb like.

Muchas gracias por el comentario me alegro de que os guste.

Estaría mejor si se hace un rebaje para insertar unas piezas de remate negras como la NES original.

Estoy en ello, mi idea es modificarla para que solo use uno o dos tornillos, y esas piezas negras impresas, pero no tengo tiempo, aunque algun dia lo acabare...

!muchas gracias por compartir!