Qidi Tech Filament Alignment Bracket
by KludgeGuru, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a remix of the Flashforge Creator Pro Filament Alignment Bracket by Makersome. I added a lip at the bottom so the tubes do not fall down. I also put in a funnel at the bottom to help guide the filament into the tube when loading. I changed the overhang to two slopes to aid in printing. It is specifically designed for the Qidi Tech 3D printer but it should work on the Flashforge also.
Designed in Solidworks 2016. I've included the 3D model in Solidworks and IGES format.
Printed in PLA
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Qidi Tech Filament Alignment Bracket by KludgeGuru is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving KludgeGuru a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure KludgeGuru would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).