Rope pulley katrol
by wingmaster, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
The pulley diameter is 31 mm with a 6 mm groove. It uses 2 bearings for a smooth operation. The rope on the picture is 5 mm and runs very nice through it.
It is possible that a bit of sanding is needed to make the bearing fit in the pulley.
Parts to print:
- 2 sides
- 1 ring
- 1 pulley
I printed them with (transparent) ABS 0.3 mm at 90% fill. Will also work with PLA or other plastics.
No support is needed. The pulley wheel has a designed in support. You need to break this out.
Other bits needed:
- 2x M4x25 (shown on photo. They just fit without washers) or M4x30 (better) bolts
- 2x M4 lock nuts
- 4x M4 washers (optional)
- 2x bearing 624ZZ 4x13x5
100um to 300um
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Rope pulley katrol by wingmaster is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving wingmaster a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure wingmaster would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).