Batman v/s Superman contest
light is giving a shade but its very large. In the design process we desisted that we are not going for the shade but to make the design of the light as an object.
most of the things you can print without support.
be aware that some files need support.
The design is based on the fact you should be able to print it on a 300mmx300mm bed 200mm height.
The lampshade connector you can glue to the lampshade. We have done this with our 3d pen so its welded together.
You can choose to print screws we choose to use the metal ones with we already had. The holes are for M5 bolts.
we use a E27 fitting for the lighting. With the 2 rings we clamp it on to the lampshade.
the swing arm is printed with support as well as the swing arm connector.
the leg file is printed without support. the hinge moment is printed in. if you print this with support it will not work.
You can choose different logos at the bottom or on the light it self. So print the ones you like.
good luck printing
printed with: by ctrl design filament 2,85 mm
collors: red, iron grey, silver grey, dark blue
design: by ctrl design
3D-print: by ctrl design