Replicator Mk8 spring loaded filament drive
by stephenmhall, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Replicator MK8 spring loaded filament drive. imported originals into sketchup so I could edit sizes a bit to fit 5x10x4 bearing I had. tidied up model after import and got all holes bang on size.
Already printing Right drive with constructed left.
Adjusted printed parts for standard socket allen bolts. I got some 4mm x 0.5mm brass tube to make a shoulder allen bolt, seems to work fine.
I had some 40mm x 9mm springs that I cut in half to use. guessing the force is ok as it seems to be printing fine.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Replicator Mk8 spring loaded filament drive by stephenmhall is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving stephenmhall a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure stephenmhall would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).