Customizable storage box and display stand for your atomizers with 510 connector. No matter if you have a dripper or tank, you can adjust all dimensions that matter. Dust protection and storage solution for on the go.
Set diameter to be slightly larger than the diameter of your atomizer (default of 23mm should work for most atomizers). Set height to the height of your atomizer including the 510 connector.
Printing time averages to about half an hour per container.
Tolerances may vary on printers. The first time it is quite hard to fit them together but it works pretty well after opening and closing it a couple of times, if it is too tight, increase the tolerance.