Top Magnet Mount Bracket for Hammond 1590G Box Mod
by AnalogDan, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This bracket allows you to gain more build space in the enclosure by eliminating the top screw posts while still having a means of mounting the top 2 internal magnets.
I use 3mm (diameter) x 4mm (height) magnets, the magnets and bracket are fixed with epoxy.
The best you got
My software (cura) was not adding supports so I incorporated them in the design, there is a small break away piece between the 2 magnet mounts where the lip of the lid would be.
Gently clean up the magnet holes with a 1/8th drill bit, you can (and should) do this by hand.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Top Magnet Mount Bracket for Hammond 1590G Box Mod by AnalogDan is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving AnalogDan a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure AnalogDan would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).