2x 18650 Battery Sled w/ Magnet Mount
by AnalogDan, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Most existing 2x18650 battery sleds need to be modified to fit inside Hammond 1590G enclosure leaving enough room for the other components.
This custom dual 18650 battery sled will fit in the 1590G without requiring modification (of the sled) and leaves plenty of room for the rest of the components.
Because one of the bottom screw posts needs to be removed regardless which dual battery sled you use, this sled has a built in magnet mount where the screw post was so you still have all 4 magnets holding the lid securely.
The magnet hole is designed for a 3mm (diameter) x 4mm (height) magnet and the channels for the battery contacts fit the Keystone 1017-1 battery contacts.
This sled is available with clear marking for either series or parallel batteries.
The best you got
Gently clean up the hole for the magnet using a 1/8 drill bit, do this by hand.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
2x 18650 Battery Sled w/ Magnet Mount by AnalogDan is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving AnalogDan a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure AnalogDan would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).