CoreCube SAKURA(original reprap printer)
by ichibey, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Original reprap Printer.CoreXY Type(Beta Version)
Beds are created in the aluminum angle.
Hot end and extruder is prepared separately.
Aluminum frame 20x20x300 Qty.12
Guide Shaft(X/Y) OD8x300 Qty.4
Guide Shaft(Z) ID10x300 Qty.2
ReadScrew(Z) M8x300 Qty.1
LinearBush(X/Y) LM8UU Qty.8
LinearBush(Z) LM10UU Qty.4
Bearing(Idoler) W683ZZ(3x8x4) Qty.4
Timming Pulley MXL Z15(BeltGuide4mm) Qty.4
Timming Belt MXL(BeltWidth3.2mm) Length About 2M
Coupling(Z) ID5-8 Qty.1
Thrust bearing F8-16M(8x16x5) Qty.2
Added at a later date
Aluminum Parts DXF and Picture Add.
Test Print Movie
Extruder Add.(Gear m=0.5 Z=24,Bearing 625VV and Spring use)
because the rigidity of the y-axis is missing, under review.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
CoreCube SAKURA(original reprap printer) by ichibey is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving ichibey a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure ichibey would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).