Lm8uu X Carriage with Fan Mount for Prusa Mendel
by GregFrost, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This carriage has some differences from my other lm8uu carriage:
It is designed to work with nophead's half-belt hack: where the belt is either twisted or cut and joined such that the smooth side of the belt goes over the idler bearing (the teeth grippers on the belt clamps are on the other side).
It has a square(ish) hole so that it can accept my hotends that use 30mm aluminium tslot as a heat sink: http://i1236.photobucket.com/albums/ff455/gregfrost1/IMGP1349.jpg
The belt clamps are designed to use a single screw instead of 2.
It is slightly narrower than the previous version (to maximise x travel and get the fan a bit closer to the hotend heatsink).
Thanks to Triffid Hunter I have included a ram to protect the belt from the tensioning screw.
- The double bearing is now on the side of the belt where it belongs (Less binding if binding is even possible with linear bearings).
Photo to follow (currently printing).
You are best downloading the files from my github: https://github.com/GregFrost/PrusaMendel as they will be kept updated and will have all the dependent include files.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Lm8uu X Carriage with Fan Mount for Prusa Mendel by GregFrost is licensed under the GNU - GPL license.
What does this mean?
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving GregFrost a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure GregFrost would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).