Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
i3 Magnetic dual hotend mount
by karlzhao314, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a design for a dual extruder with a simple magnetic coupling, inspired by OpenCircuitDesign's Makergear M2 twin extruder. Essentially, there are 3 parts to it: a middle block to which the belt is affixed and a left and right block that carry the hotends (E3D v6s). The middle block is spaced so that it cannot attach to both the left and right blocks at once, so through some G-code manipulation it's able to detach and reattach to either block without any extra electronics. This allows for each hotend to be manipulated and compensated for separately similar to dual X carriages, which might be able to eliminate ooze and hotend leveling issues.
Visit this link for OpenCircuitDesign's original article and an explanation of the principles behind it:
Project is a work in progress: it's still missing the two parking points on either side of the X rods and no prototype has yet been printed because I'm still awaiting magnets.
Autodesk products export STLs in a strange orientation. Rotate and print as you see fit.
6x 8x10x8mm bronze bushing (LM8UU bearings were too long)
28x 4x2mm round neodymium magnets
M3 bolts and nuts
Assembly: Coming after I make my own prototype
How I Designed This
Inspired by OpenCircuitDesign's magnetic twin extruders for the Makergear M2, designed in Autodesk Fusion 360. Will release design files when the project is complete.
Select a service to print this Thing and ship it to you
i3 Magnetic dual hotend mount by karlzhao314 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving karlzhao314 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure karlzhao314 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).