Loading

Rigid XEnds w/ Adjustable Endstop

by GregFrost, published

Rigid XEnds w/ Adjustable Endstop by GregFrost Dec 30, 2011
7 Share
Download All Files

Thing Apps Enabled

Order This Printed View All Apps

Contents

Tags

License

GNU - GPL
Rigid XEnds w/ Adjustable Endstop by GregFrost is licensed under the GNU - GPL license.

Use This Project

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.

Print Thing Tag

Thing Statistics

13716Views 2652Downloads

Summary

These X-Ends build on prusajr's and my previous work to add a few neat features.

I found with the original prusa X-ends that the screws that held the x rods would slip when you tightened the X belt and that would pull the PLA bushings off the Z rods. You get a similar problem with LM8uu X ends but instead of pulling them off the rods, they flex the Z rods and as a result can cause the Z axiz to bind when you raise it closer to where the Z rods are constrained by the frame.

The push fit X ends sort of address the issue, but you would need to cut the length of the X rods very precisely.

This design has one X end closed and one open (but closeable by the insertion of a screw or piece of 3mm filament).

The closed end has a nut trap in the end so that you can install a tensioning screw. That allows you to precisely set the separation of the X ends and have them held rigidly at that distance regardless of the tensioning of the X belt without the need to cut the rods precisely.

The open X end allows you to slide the X rods all the way out (once you remove the locking screw/filament) to easily replace or service your X carriage/extruder.

The x-end-motor has another new neat feature which is a platform that allows you to screw adjust the height of an endstop landing pad. This should make adjusting the Z endstop (which is the only one that needs adjusting accurately) much simpler. I found that it was very much trial and error adjusting the traditional endstops because not only did they slide up and down the rods, but they would also tilt slightly which also affected their set-point. Getting them adjusted accurately was an exercise in frustration.

To use the Z adjustment, you need to remove the support section of the adjustment column, then insert the captive nut and screw and tighten the screw until it flexes the landing pad down slightly. Then set your Z stop a bit low and iterate the process of adjusting the screw and homing the Z until you are happy with the home position. I put a nut in both the top and bottom nut traps, but strictly speaking, only the bottom nut is essential.

I have also shaved off the bump on the motor mount so that I can use 10 tooth machined T5 pullies instead of printed 8mm pullies without the belt rubbing on the bump.

There is also an optional x endstop mount on the x-end-motor that allows you to use an automotive/cherry microswitch (the kind that has 3mm mounting holes) so that you don't need special hardware to mount your endstops, you can just use m3 screws. Incorporating the endstop in the X end also allows you to maximize x travel. This can be good if you print on glass or have a build plate without a purge area to allow the x home to be off the platform so you can wipe the nozzle and do any pre-print priming. Checkout the pic from the top with the X at its home position. There is literally no travel wasted.

The model is parametric to allow for you to use 2 lm8uu or 1 lm8luu in each X end. I have uploaded both varieties.

Please refer to my github for the OpenSCAD source files: https://github.com/GregFrost/PrusaMendel

All Apps

3D Print your file with 3D Hubs, the world’s largest online marketplace for 3D printing services.

App Info Launch App

Auto-magically prepare your 3D models for 3D printing. A cloud based 3D models Preparing and Healing solution for 3D Printing, MakePrintable provides features for model repairing, wall thickness...

App Info Launch App

Kiri:Moto is an integrated cloud-based slicer and tool-path generator for 3D Printing, CAM / CNC and Laser cutting. *** 3D printing mode provides model slicing and GCode output using built-in...

App Info Launch App
KiriMoto Thing App

With 3D Slash, you can edit 3d models like a stonecutter. A unique interface: as fun as a building game! The perfect tool for non-designers and children to create in 3D.

App Info Launch App

Print through a distributed network of 3D printing enthusiasts from across the US, at a fraction of the cost of the competitors. We want to change the world for the better through technology, an...

App Info Launch App

Quickly Scale, Mirror or Cut your 3D Models

App Info Launch App

3D Print a wide range of designs with Treatstock. Easy to use tools to get the perfect result. The global 3D printing network that connects you with high-quality and fast working print services nea...

App Info Launch App

I like all the stuff built into the motor end (Z-stop adjuster
&
amp; X endstop mount) very cool.. But what I would love would be an X-Idler End with smooth rod clamps like:

http://www.thingiverse.com/thing:18384http://www.thingiverse.com/thi...

Then I wouldnt need to cut my extra long X rods :) I wish I understood Openscad enough to try editing it :(

Improved X ends for Prusa with clamped rods

How would I change the M8 nuts for the lead screw out for M5 instead?

I printed this but noticed that my M8 nuts are loose in the x ends. When I say loose they still pull the x ends up and down but the nuts can move a little before they actually move up. Is this normal?

A bit of play helps prevent Z wobble in the event of slightly bent z rods or slightly misaligned z rod/motor.

Thanks Greg :)

would be nice if you made an update with the zip-ties going around the whole thing, like many have modified the original. So its doesnt need to make it so week on those spots..

Parts printed very well. Thanks! :)

I had a little trouble with the short sides on the x-end-idler, the first few layers are a little too narrow in that section (measuring between the outside edge and the gap for the rod clamp) resulting in only a single line of filament being placed there in the beginning. When it finally gets to a layer where it tries to print both sides of the perimeter (with no infill), there isn't anything for the second line to stick to.

I'd suggest either making the overhang more vertical (making the whole part slightly wider at the bottom) or widening the whole part by 0.5mm on each side (leaving the rod holes where they are.)

FYI, my extrusion settings are 0.2 high and 0.5 wide at the moment, with a 0.5mm nozzle. Bridging isn'
t going too well at the moment, the filament tends to snap and blob onto the nozzle until it's scraped off on the other side of the bridge.

Very nice, as always!

I really like the z-adjustment.

Top