Hey! This thing is still a Work in Progress. Files, instructions, and other stuff might change!
by Reeley, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
!Important notice: although this thing works fine for me, I wouldn't recommend you to try to install it on your plane. It might cause more problems with reliability.
Lock Pin for HobbyKing Sky Eye Tail
This pin was designed for HobbyKing's Sky Eye planer: http://www.hobbyking.com/hobbyking/store/__41322__HobbyKing_174_8482_Sky_Eye_EPO_FPV_Glider_w_Flaps_2000mm_PNF_.html
The idea is to avoid gluing tail into fuselage. I liked HobbyKing's Bix3 wings pins that locks them tight, so I've made similar to my planer's tale. Please see photo for place where to drill 8mm hole
4\25: pin itself was made with mistake - projecting part should have been rotated 90 degrees. Also added sketchup file for your modifications
4\26: printed on makerbot 5th gen - pin gets into washers too tight, I will update files today evening and will change inner holes in washers
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Lock-Pin by Reeley is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Reeley a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Reeley would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).