I decided to re-design the original Bracket that I created to mount the External Antenna Wire after the CGO2 has been modified with a 30 cm Ufl to RP-SMA Antenna Wire so it can be Quick-released and can be used with the Steady Grip.
How to install:
3D Print 2 of the STL Files called "Yuneec Q500 External Camera Bracket V2 Drone Clip"
One should be epoxied to the bottom of your Q500 and also has a optional pilot Hole to add a screw for an additional way to secure the Bracket to your Q500 and the other one should be attached the same way to your Steady Grip. (See Pictures)
3D Print 1 of the STL Files called "Yuneec Q500 External Camera Bracket V2 Antenna Clip" screw a #6-32 1/2" Screw thru the smaller Hole it should be able to thread into the Plastic. (See Pictures)
This Part will be what the RP-SMA Antenna Connector will attach to. (See Pictures)
Additional Hardware needed:
1 x 6-32 - 1/2" Machine Screw
1 x 6-32 - Wing Nut
1 x Tube Plastic Epoxy
2 x #8 1/2" Screws (Optional)