Loading
EverydayPineapple

Pineapple Bubbler

by EverydayPineapple Jun 4, 2016
Download All Files

Thing Apps Enabled

Please Login to Comment

This one looks great! Have you ever considered enhancing it with a filter piece that can be filled with charcoal? :-)

Thaaaat doesn't look like a bubble blower

I had a question regarding the big pineapple base. I've printed it twice, one at 72% scale and 67% scale, and both times, the pineapple only prints about 70% of the actual build; as in, it stops a little over halfway through and the bottom half of the pineapple is all that is completed. Is there something i'm doing wrong?

what the size do you print at

Hey i want to use this stem :https://www.amazon.com/gp/product/B01L0X9UUQ/ref=ox_sc_act_title_3?ie=UTF8&psc=1&smid=A331YGY2FAFWIB
and this Bowl piece : https://www.amazon.com/gp/product/B01MSWR4IV/ref=ox_sc_act_title_4?ie=UTF8&psc=1&smid=A2ARQN5LCV83C9

because i don't want the unheated smoke to contact much plastic. will this work or will the glass stem not fit into the pineapples stem?
alternatively would it work if i removed the pineapple stem after printing?

I have the same concern. Can't be that big a deal to cut it out in tinkercad. this thing is awesome

never mind, its too big for tinkercad

Just printed this Pineapple! Check out my time lapse video of the print:

https://youtu.be/G58TRKveQFs

I have also made a water pipe, top prevent leaking (even with two shells) you can spray rubber spray onto any piece that holds water, since my pipe was white, I used white rubber spray and couldn't even see that it was painted. The longest I have held water in there was two months, I thought that was a sufficient test of the pieces capabilities.

Please don't smoke out of ABS or PLA people!!! They degrade and CAN NOT be cleaned with isopropyl alcohol; you are inhaling cancerous hydrocarbons once hot smoke has been introduced to the plastic for an extended period of time.

@everydaypineapple, if I have one suggestion make the pineapple straw an 18mm fitting for a glass on grass fitting so theres a chance of people using an ashcatcher for an all glass pre-percolation(?) the pineapple is essntially a mouthpiece not a smoking vessel, less chance of the plastic getting dirty and ultimately much worse for your health than smoking alone.
Thank you for your dope design though homie

Valid concerns, you have. As it prints now, you can (and probably should) use a glass ash catcher with it, but It does have to be the 14mm size. (you could use this either in place of the printed one, or in line with it, since the size of the input and output end is the same.) I'll try to make one with an 18mm fitting, but I don't have the equipment to test it right now.

I was going to work on a version with an all glass stem. So you would have grass on glass on glass on plastic, or with an ash catcher you would have grass on glass on glass on glass on plastic. But, I haven't been able to source a proper glass tube. If you might know of something please let me know.

Glad you like the design!

Thank you so much for these files. The bubbler printed perfectly. I uploaded pics if anyone would like to look at them. Thanks again, I know it takes a lot of hard work to make things.

Thanks man! Those pictures are gorgeous!

I wouldn't call it luxury to inhale the "cool smooth" toxic vapors, but optically it looks cool.