Filament spool holder
by juewei, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This Filament holder comes in two parts.
a) 3D-printed mount that comes in two parts. Both have a flange and a tube section andgently slide on each other, to change spool and accomodate different spool widths.
b) lasercut legs to stand the spool on a table.
the 3D-Printed mount has a hook at the back of the flange so that it can be mounted on a 3mm acrylic edge, if you have that on top of your 3D Printer housing somewhere. Works well for a tinyboy fabricator - if the spool is sufficiently light. Otherwise it jams against the back of the housing or the entire printer may tumble over.
For these cases you need the legs.
Maximum spool dimensions:
- Diameter 225mm diameter with 68mm hole.
- Width 110mm.
Cat not included.
inspired by http://www.thingiverse.com/thing:957550
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Filament spool holder by juewei is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving juewei a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure juewei would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).