Genuino / Arduino Uno ProtoShield - Circuit Board
Printable circuit board for your Arduino Uno project. If you don't have pin connectors you can connect the shield to Arduino with cable (that's why I'm design this shield). There is a special .stl file with cable mount. When soldering be careful so that the plastic does not melt. I attached a paper with front face and back side of this board to design you shield by pen.
You can customize your board (shield height, grid size, cable holder, ...).
0.3 mm first / 0.2 mm next
PLA works very well
2 permitter, 2 base layer, 2 top layer, 20% linear infill, 0.3 mm Nozzle, first layer 0.3 mm + other 0.2 mm