Reinforced Spool holder for Prusa i3 - Lasercut frame type fit
by Prenta, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a spool holder for Prusa i3 Laser cut frame
Tried to print thingy 68329 and it didn't fit.
So did my on design on it. So here it is!
Changes - fits to the 39889 thingy, bit larger in dimensions - sturdier.
Made a filament guide for this thing too.
For the instructions I quoute partly iPadNanito
- 2 x Spool_holder_axle_piece_v1
- 2 x Spool_holder_frame_piece_v1
- Mount it: you need:
- 4 x 25mm x M3 screws
- 4 x M3 nuts
- 4 x M8 nuts
- 2 x 608zz Bearings
- 3 x Threaded rods about 15 cms each
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Reinforced Spool holder for Prusa i3 - Lasercut frame type fit by Prenta is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Prenta a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Prenta would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).