Loading
JinwooYoo

90 degree angle bracket (Fixed)

by JinwooYoo May 4, 2016
Download All Files

Thing Apps Enabled

Please Login to Comment

Tiene un hueco, me di cuenta al imprimirlo, una lastima porque esta muy bueno

unfortunately not read the comment before I have tried to print twice this nice design... but still around 5 mm gap...
is there a remix or a fix to this soemwhere ?

still Faulty
only the side on the build plate prints
must still have a HOLE Please fix the STL file

There is a big hole in this, not usable at all

http://prntscr.com/dub98f

이 파일을 가져 주셔서 감사합니다, 나는 그것을 가정에서 여러 번 사용했습니다 !

Yep, model has a large open spot where there should be a support. Also, there are no screw holes on one side of the bracket.

Example:
http://imgur.com/a/JowyL

did you do 100% infill?

As you can see in your STL: there is a hole right in the edge.
Not printable.

Yes i found, did you print the file with 100% filling?

I didn't print it, I designed my own on your specs and used this.

than you for the correction