This is a 3D model of a velomobile, or - to be more specifc - a Sinner Bikes Mango Sport (as manufactured in 2013). The role model is a 3D point cloud generated from a series of images.
A velomobile is a recumbent with a shell which allows for higher speed and comfort than usual bikes.
The model is a bit simplified to be printable at smaller scales, so not every detail is covered here. The images try to summarize the production process.
FlashForge Creator Pro 2015
Printed with Colorfabb Woodfill filament. It is the first time I tried to print with this kind of filament and it took several attempts. The main result is to print at very low speeds (10 mm/s).
The support is printed with a standard PLA which doesn't seem to stick to the Woodfill filament.
The woodfill filament is nice to be sanded afterwards which yields a smooth surface. Afterwards, I applied some wooding oil.
I used a smartphone camera to catch ~100 images of the vehicle. The VisualSFM (structure from motion) program converted then these images to a 3D point cloud. Blender was then used to create a model by using this point cloud as a role model.