Loading
ffleurey

Parametric and Customizable Project Enclosure

by ffleurey Sep 23, 2013
Download All Files

Thing Apps Enabled

Please Login to Comment

This worked amazingly well for my need for an enclosure for a prototype. Thanks! (I sent you a small tip in appreciation.)

Thanks :-) I am glad it was useful for you, cheers, Franck

Thanks for the openscad file! I'm going to experiment with this. I am looking at the picture with the example builds and notice that the nuts are on the outside of the cover and the bolt inserted from the bottom. Am I correct?
Is everyone using it like this?

I'm thinking of changing it to solid corners and a small screw hole and using self threading screws. Any thoughts on this, or alternatives?

Great project! I'm having some issues with the exported stls having some shared triangle edges even after I put the stl through the autorepair in netfabb. I'm using KISSlicer, is anyone else having these issues?

Could you make an option to use Hex nuts instead of the square ones? All my nuts are of the hex type and are easier to come by.

Beautiful design! The only thing I tweaked was to make it print the cover next to the enclosure. Thank you for including the .scad file.

24HourEngineer - Could you post somewhere the changes you made to do this? I am a newbie to OpenScad. Thanks.

I wanted to do this as well and came up with this solution.

In module both() you could wrap a translate around lid2 like this:

translate([0, enclosure_inner_width+5, -(enclosure_inner_depth+enclosure_thickness)]) {
lid2(enclosure_inner_length,enclosure_inner_width,enclosure_inner_depth,enclosure_thickness,enclosure_thickness/2+0.10,cover_thickness);
}

Sure thing, bernbout. I wrote a blog post about it and there a lot of examples. Check out the "Wrist base" link near the bottom.
Good luck and welcome to OpenSCAD.
24hourengineer.com/2015/09/2015-09-09-w-wrist-mounted-chording.html

Please add video with practical usage for those toys, Thanks

Hi, love the design this will save me from buying boxes from Radio Shack. Quick question what size screws are you using to hold the cover on?

Hello, the screws and nuts are all M3. Cheers!

Awesome. Thanks for sharing this!

What are names of those black and red connectors that you're using in the boxes?

I think that they are called "banana jacks". Cheers!

HI..

Not sure if this is a problem but when I tried to make a cover it still made the box only, I wanted to print a cover,

Hi! Are you using the Customizer or the OpenSCAD file directly? If you are using the Customizer you should get 3 STL files: The complete box (useless for printing), the box without cover and the cover alone. You should be able to download and print the cover. If you are using the OpenSCAD script you can set the variable part to "cover" and the script will generate only the cover. Hope this helps :-) Cheers!

This is very slick!

So how do you add the various holes for connectors, bulbs, etc., that you show in the photo? Take the generated STL and modify it? Or do you drill through the plastic to make your holes?

As a 'feature request' how about adding the ability to customize with labels and holes? Admittedly it's tricky because you need to match component positions.

Or is the idea that you wouldn't use Customizer for that, but would use your Thing as a component in an OpenSCAD assembly that took your generated enclosure and subtracted holes, added labels, etc.? Come to think of it, that might be the best answer, at least for people comfortable with OpenSCAD, since it would provide access to the existing component and connector libraries. :-)

Hi! Thanks for the comment!

It is a bit tricky to make specific holes and labels through the Customizer but it works fine for the box size. What I am doing is either importing the OpenSCAD modules or the generated STL files in OpenSCAD and then I use OpenSCAD (and its libraries) to make the holes and add the stuff I need.

Cheers!