This is a remix of the original micro 105 fpv quadcopter to accommodate the HYPERION MINI 600 TVL CAMERA W/BUILT IN 5.8GHZ 25MW VTX
Micro size, only 4.5grams!
I'm getting right at 5min fpv flights (fast flying) with a 500mAH battery
I got in some new Nano-tech 500mAh 25~50C today
and with them i am getting 6mins flights and they have alot more go-go power
I recently change the frame just a bit I was having an issue of the ring thats going around the motor breaking off from the rest of the frame in a crash, I changed it to add a little bit more plastic in that spot, also in the previous versions there was spot in the frame to allow the USB cable to plug in, I've made a little case for the flight controller which holds it up from the bottom just a bit more and so I done away with this slot in the frame. You can find the case here at this link:http://www.thingiverse.com/thing:1579829
I have also modified the top part to accommodate the taller FC being inside the case both files are listed as V2
These STL files are calibrated to my printer to accommodate the 8.5 millimeter Motors, if you find them loose or tight with your printer you can scale the model up or down to suit your needs, depending on your layer height takes roughly a little over an hour to print the bottom and about 15 mins to print the top