Millenium Falcon cufflinks

by demomeatloaf, published

Millenium Falcon cufflinks by demomeatloaf May 12, 2016
7 Share
Download All Files

Thing Apps Enabled

Order This Printed View All Apps



Liked By

View All

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.

Print Thing Tag

Thing Statistics

22592Views 6570Downloads Found in Accessories


For cufflinks! I added a base so it would adhere to the cufflink back easier.

Print Settings


Da Vinci 1.1 Plus










Glue to cufflink back (sold on Amazon).

How I Designed This

Rhino 5

More from Accessories

view more

All Apps

Auto-magically prepare your 3D models for 3D printing. A cloud based 3D models Preparing and Healing solution for 3D Printing, MakePrintable provides features for model repairing, wall thickness...

App Info Launch App

Kiri:Moto is an integrated cloud-based slicer and tool-path generator for 3D Printing, CAM / CNC and Laser cutting. *** 3D printing mode provides model slicing and GCode output using built-in...

App Info Launch App
KiriMoto Thing App

With 3D Slash, you can edit 3d models like a stonecutter. A unique interface: as fun as a building game! The perfect tool for non-designers and children to create in 3D.

App Info Launch App

Print through a distributed network of 3D printing enthusiasts from across the US, at a fraction of the cost of the competitors. We want to change the world for the better through technology, an...

App Info Launch App

Treatstock is an online platform that offers decentralized manufacturing services such as 3D printing and CNC machining for clients all over the world. We offer free and instant access to comparati...

App Info Launch App

3D print your favourite design with NinjaPrototype, a professional 3D manufacture with consistent quality and speed.

App Info Launch App

Unfortunately 2 unsuccessful prints. :( It prints fine for about 3 hours (at 600% scale) so I go to bed. I get up a couple of hours later to check on it and it's been knocked over. The funny thing is, it looks like it happened at the exact same spot on both prints. It's right after the blaster section print. I'm at work so don't have a picture.
Is there anything special you did to make this stay secured? I'm printing this on a Creality CR-10, with your recommended specs. The first print the hot bed was at 45° and the second print was at 60°. Figured the heat would keep a more secure lock on the print. Both printed on glass with hairspray as adhesive.
I really want to get this printed out because I like the detail you have on the print. I may throw some supports on it next time and deal with that later. But any suggestions anyone has to get this printed out would be greatly appreciated.

If you're printing with pla (which you should be with something like this):
60c bed
A nice big brim
Try Elmer's glue stick instead of hairspray, I tend to have very good luck with the stick.
Last resort is printing slower, if you see that it's the same spot it could either be mechanical or the thing is getting knocked over... Try a setting where at every retraction the head lifts (it's somewhere in cura for sure). Cr 10 is a good machine, but requires very fine tuning when printing detailed objects like this.

Great advice! Thanks! I'll tweak it tonight and hopefully "3rd time' a charm!" Once I get it printed I'll post a picture.
Thanks again for the advice and thanks for the very detailed falcon.

it does'nt need, but the model its not so good either, i had some issues

What problems did you have?