2020 extrusion end cap with filament guide
by animoose, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
End caps to fit onto 2020 extrusion. Specifically, these are meant for the uprights of an Eclips3D, which are closed on two sides. There is a variant which has a guide through which you can pass the filament, optionally via a piece of PTFE tube. It may be a tight fit - if so, file the hole out slightly. Note that you will need to print two of the caps in mirror image, which can be done easily in Repetier host.
Added another version which allows you to tighten the holder around the PTFE tube using a M3 bolt and nut. Don't overtighten or you may distort the tube.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
2020 extrusion end cap with filament guide by animoose is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving animoose a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure animoose would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).