M5 Threaded Rod Knob (w/ Nut Trap)
by costamosta, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Simple knob for Z axis threaded rods used for leveling your (heated) bed. (Pictured on a Makerfarm Prusa i3)
Requires two M5 hex nuts per knob.
For rods with 5mm thread-to-thread widths. Push one nut into the knob's nut trap. Thread the loose nut down the rod first then thread the knob with the other nut inside over it until they meet. Tighten knob and bottom nut to fit snugly.
30mm width, 10mm Height, M5 Nut Trap.
Using the following options:
Knob_Diameter = 30
Rosette_Radius = 7
Rosette_Offset = 3
Wall_Thickness = 3
Knob_Type = 1
Thread_Size = 5
Knob_Fill = 2
Number_of_Rosettes = 6
Chamfer_Size = 1
Knob_Thickness = 10
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
M5 Threaded Rod Knob (w/ Nut Trap) by costamosta is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving costamosta a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure costamosta would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).