2-3DQR quick release for 22mm shaft
by xz81, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Quick release for direct drive wheel simulators. It is based in an original design by Racing Mat from xsimulator.net forum. It is improved so can be used as a quick release using a 34.9 bike seat clamp or just attach it to the shaft with one M6 bolt.
Used in my OSW (open sim wheel) system.
More info in http://simuhack.com
Designed to print without support
0.4 nozzle, 0.2 mm layer, 4 perimeters and 4 top-bottom layers.
Using XT-CF20 to increase strength requires low speed (~40mm/sec)
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
2-3DQR quick release for 22mm shaft by xz81 is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving xz81 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure xz81 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).