DJ105, 105mm brushless quadcopter
by DirtyJ_Designs, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
**Version 1.4 files are now up. Now supports runcam owl camera!
Follow the development on rcgroups:http://www.rcgroups.com/forums/showthread.php?t=2665918
3d printed parts available for those without printers at the etsy links below.
Full 3d printed parts kit: https://www.etsy.com/listing/281782614/dj105-quadcopter-frame-kit-3d-printed?ref=shop_home_active_1
105mm brushless quadcopter with integrated prop guards. This is based off the RS90 design but will work with fullsize rotorX 2535 props. It will support 11XX sized motors and 1304 motor that work with the 2535 props. This design supports a fullsize naze as well. Currently including mounts for the TBS unify pro VTX and the 170/120 degree $10 banggood camera. More mounts will be coming in the future for different cameras and vtx's. I also plan to design mounts for the Hubsan 200w 720p recording module as well as the 808 #16 decased camera.
To finish this frame additional hardware is required:
14- 20mm m3 nylon standoffs
28- 6mm m3 nylon screws
Multirotormania is a great source for colored nylon hardware. http://www.multirotormania.com/80-colored-nylon-
HIGHLY recommended to print the frame plates in Taulman 910 nylon. When printed in nylon this frame has proved to be nearly indestructible. Print the center plate and spacers in PETG/PLA/ABS. Camera mount and vtx mount are designed to be printed in nylon or TPU, something with some flex.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
DJ105, 105mm brushless quadcopter by DirtyJ_Designs is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving DirtyJ_Designs a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure DirtyJ_Designs would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).