Update01: (FullStandReadyForPrint02.stl) modified the gap under the left and right feet.
iPhone 6 Stand, Fits iphone 6 without protective case.
No restriction on the setting, however, for ultimate results, use at least 30% to 50% infill and a layer height of 0.1 mm or 0.2 mm.
If you have issues with your models sticking to the build plate, then I recommend you add a few columns of support reaching midway on the inclined stand. otherwise, support is already built into the model.
- Printing Time 05:30 at 0.2 mm layer height and 10:35 at 0.1 mm layer height