This things are a Walking Stick Holder/Mount for a Rollator/Wheeled Walker.
There is a clip to fix the stick and a cup to put the lower end of the stick to hold it in place.
The two parts are desigend to fit on a bar/pipe with a diameter of 26mm.
You need 2x M5x20mm screws and 2x M5 screw nuts.
You can also use M4 screws and nuts.
22.03.2017: added 10, 20 and 30 mm longer Clips
0.2 layer height, 5 top/bottom surfaces and 3 perimeters
This things are designed that you can print them without any raft nor support.