Practice to quickly cut rods ...
Nota: I use this model
But if If you have another model of Rotary Tool Flex, you can adapt in your own way with the step file supplied (Clamp stud).
I recommend printing in ABS with 30% infill
To add :
1 Screw M8 80mm (or a threaded rod M8)
1 Nuts M8
2 Washers Ø8mm
2 Screw M3 15mm
2 Nuts M3
3 Wood screws (countersunk head) length 10mm Ø 3 or 4 mm
1 Spring Øext 14mm Øint 11.5mm Length 50mm
Help me replace filament and make updates, thank to: Tip Me
Thanks in advance.