EZ-Robot Simple Sonar Mount
by JustinRatliff, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a simple sonar mount for EZ-Robot. In the example pictures I designed it for clipping onto my robot's arm above the gripper. It has a male ez-bit for connecting to parts from http://www.ez-robot.com
Several versions are included here for forward facing sensors, meaning the sensor is as the front of the ez-bit, or reversed, meaning that the sensor is as the back of the ez-bit. There are also flat versions that could be glued on your robot instead of using the male ez-bit.
The sensor will mount with a small bolt and nut that you will need to supply. Or you could use a dab of hot glue.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
EZ-Robot Simple Sonar Mount by JustinRatliff is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving JustinRatliff a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure JustinRatliff would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).