Oculus Rift CV1 Wall Mount

by boopidoo, published

Oculus Rift CV1 Wall Mount by boopidoo Jun 6, 2016



Design Tools


Liked By

View All

Give a Shout Out

If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.

Print Thing Tag

Thing Statistics

17105Views 3468Downloads Found in Video Games


Browsed for existing mounts but only found variants that were extremely large and bulky, fiddly to use and weak. So, as with many of my designs I designed my own. This one is small yet still offers a secure mount for the Oculus. It's best feature is that is doesn't require a lot of fiddling to use, doesn't break and only requires one screw. It also works with VR Cover attached to the CV1.

REV A - This is a revised and slightly beefed up version. The only difference in this revision is that the mount tab has more material and is stronger then the original mount. The reason why I made this revision is not that the original mount has proven to be too weak but rather that some believe that it might be too weak. For those i made this even stronger mount. Since it uses more material the cost is very slightly increased.

Shapeways: https://www.shapeways.com/product/PS93M8J6H/oculus-rift-cv1-wall-mount

More from Video Games

view more

All Apps

Upgrade this Thing with Thingiverse Apps

Tools and Utilities

Repair, slice, or enhance this Thing

Auto-magically prepare your 3D models for 3D printing. A cloud based 3D models Preparing and Healing solution for 3D Printing, MakePrintable provides features for model repairing, wall thickness...

App Info Launch App

Kiri:Moto is an integrated cloud-based slicer and tool-path generator for 3D Printing, CAM / CNC and Laser cutting. *** 3D printing mode provides model slicing and GCode output using built-in...

App Info Launch App
KiriMoto Thing App

Quickly Scale, Mirror or Cut your 3D Models

App Info Launch App

I'm noticing you don't allow remixes.
I'll be making and publishing a similar design for hanging on table edges, and because your holder is the best out there (in my opinion) I'll be drawing inspiration from your design.

I'd like to credit it to you though a remix, but since I won't be able to do that I'll just tell you that I appreciate your design.

Hi, I'm glad you like the design. Yes, for this design I don't allow remixes but I can't of course stop you from being inspired.

If you'd like I can make another variant based on your input?

I live in a dormatory where I'm unable to make holes in the wall. Double sided tape solutions work for the sensors (i made a thing for this), but the Rift itself is just too heavy.
The alternative methods are:

  • A stand (large, require a lot of plastic, require table space)
  • A table-mounted hanger (doesn't exist, needs to either cleverly balance the unit or have an adjustable table clamp)

What I'm seeking is the second. I'll try to make one myself, but I'm sure you'd do it better.

Ok, totally do-able. I've made some designs with clamps. However isn't it better to screw it onto the table instead of using a clamp? Plastic clamps age and deform after awhile. Is the table really thin?

I have been using it for couple of months and it is not very healty for the headset. The layer between the headset and your face (I don't know, how to call it), which is sticked to the headset, is slownly moveing forward. Just be careful.

Really, I have not noticed any changes in the headset and I've been using it since last summer. Can you post pictures of this as well as the mount as well.

Couple of day were sufficient to see it again.

Ok, I understand now. The glue has probably degraded over time making it stick less efficiently. The immediate fix would be to increase the top tab very slightly, probably 1mm would be enough. Then it would sit more securely on the plastic instead of rubber. On my set the tab sits not only against the rubber but also on the plastic so it is very secure.

Can I download the holder you use? I'm interested in it :)

I shifted the sticky interface back and I don't use it now so I cannot send you the picture of headset. I can send only the picture of the holder but there is nothing special. It is printed well. I noticed the deffect in it's beginning. I can try to use it again, wait and the send it to you. Maybe my headset has problem with the stick (low amount of it or worse quality). Otherwise the holder is great. Very small and very effective.

What kind of throttle controller is that you have on the first picture?

This is the boxes for the extra controls: https://www.thingiverse.com/thing:2532106

Saitek X52 Extra Buttons

It's a Saitek X52 Pro. I've also made custom button boxes for it that works very well.

It's a Saitek X52 Pro. I've also made custom button boxes for it.


It's a Saitek X52 Pro with custom added switch and knob boxes powered by a BBS-32.

Here's more info:

Solid print, stable mount. Good Job on the design.

Thanks, I'm glad you like it. :)

I've made a remix of this without the hole to make it look more appealing for my mount that I designed that slots into some holes in my bed and I was wondering whether it is okay to upload it to thingiverse? I would put it under remixes but I can't seem to, license issue?

Yes that is correct. It's my design and I do not allow remixes based on the design. Feel free to make it yourself but you can't upload it on thingiverse or anywhere else.

Some of my designs are free to use as you wish but some are not. This is one of those designs where I want to be the sole designer.

If you have ideas on how to improve it I'm glad to make those improvements but I must upload the design.

Oh right no worries. I just took it into meshmixer and removed the hole that's all, it was just to fit my own design as I made a slot and super glued that to the back of your hook: https://imgur.com/YLUrDXc I made some touch controller holders too, nothing special but I thought it was a good way of putting on the controllers as the wrist straps are primed for action haha.

Looks good! If you'd like I can edit and upload a version without the hole?

Awesome design, printed the non reinforced one, didnt try but i guess its already strong enough to hang myself on it if i ever decide to do that ;)

I printed the xbox / remote holder aswell and it does its job, but if you ever get around doing it pls make it a ) a lot less bulky and b ) extend the controller holder so the xbox controller cant slide from left to right on it.

Great work !

No I am not, this seller does not have my permission to sell it. Thanks for the heads-up, I have contacted the seller and it's not removed I will notify eBay.

Love this mount. Great work!
I made a timelapse of one I printed. Da Vinci 1.0 and sliced in Simplify3d.


Great construction, simple and excellent.