Wheel - Modio/Thingmaker
by brimstone326, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I got hooked on the Thingmaker app and made a Raptor. I really liked the designs and searched through all the ones listed here when I found the wheel.
My design was inspired by Marakew's wheel: http://www.thingiverse.com/thing:491232
I knew the design was faulty, but it got me thinking about how to make a functional wheel for the Modio/Thingmaker parts. It is essentially it's own bearing, with two parts printed together. I added tiny supports across the center piece to the exterior to prevent the parts from being pulled off the print bed. They just need to be cut or broken to free the wheel.
XYZ Da Vinci 1.0
I printed four of these at 15% infill and 35mm/s.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Wheel - Modio/Thingmaker by brimstone326 is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving brimstone326 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure brimstone326 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).