Endoscope Holder (PRUSA I3 MK2)
by Turbostar, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This is a holder for a 7 mm 3.5MM Android Phone Endoscope (as this from ebay http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2057872.m570.l1313.TR0.TRC0.H0.TRS0&_nkw=7mm+3.5M+Android+Phone+Endoscope&_sacat=0 ).
I made it for the Prusa i3 MK2 as it is very difficult to see the first layers. It is mounted on the hotend fan wiht original screws. It is a very tight fit, but I have still given it a bit of electrical tape to be sure that the camera does not move.
Prusa I3 MK2
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Endoscope Holder (PRUSA I3 MK2) by Turbostar is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving Turbostar a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Turbostar would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).