iPhone 7, 6s and 6 dock
by TSBK92, published
Use This Project
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
This dock is designed for the iPhone 6, 6s and 7. The original lightning cable fits inside the dock so you can charge your phone with it. The two holes in the front are for the speaker and microphone.
The iPhone 7 just fits in the 6 and 6s dock, but the cable actually doesn't. The cable is a bit thicker. So there is a modified dock for the iPhone 7 cable.
Sunhokey Prusa i3
I used micro suction tape on the bottom of the dock, so it sticks to the surface you put it on. So you can take the phone out without holding the dock. Double sided tape should also work.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
iPhone 7, 6s and 6 dock by TSBK92 is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving TSBK92 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure TSBK92 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).