This is my first attempt at a case for my Tempus Fugit Word Clock (using a Pi Zero). This will not be suitable for use with an Arduino/Genunio Nano as the power connector is in a different location. The case is designed to be wall mounted and hung on a screw.
Please print 1 each of the following:
TF Case - Front.stl
TF Case - Back.stl
TF Case - Buttons.stl
The case was designed in Autodesk 123D Design - the original design files are included.
Resolution/layer height is 0.2mm. This was designed to be printed on a FlashForge Creator Pro with a 0.4mm nozzle.
FlashForge Creator Pro (2016)
The case is assembled using M2.5 screws to fix the board in place and the back of the case on. The front of the screen can accommodate 1.5mm thick acrylic cut to suit the opening but this is not required - for security the "words" are fixed to the LED matrix of the clock using a very small ammount of super glue.
This was designed using AutoDesk 123D Design