When printing the rims by xecutor why not print the tires too? Because my VR100 has lost a lot of his tires profile and got more and more problems on carpets and door sills I designed at first a tire with a profile similar to the original one (neato_wheel_tyre_original.stl). To improve the traction on door sills I later made a second version for me (neato_wheel_tyre_climber.stl). It makes a bit more noise on hard ground but because I'm not at home when the robot is cleaning this doesn't matter me. May be that this version is helpful for other users with complicated ground too.
Both models doesn't need support structures.
Recommended print settings:
Material: white or clear TPE or TPU with shore 85A or lower
Extruder temperature: 235°C
Print bed temperature: 80°C
Print speed: 25mm/s
Estimated print time per part: 2h
Material per part: ca. 15g
I printed direct to the glass plate without capton tape because on earlier tries the adhesion of the TPE on the tape was so strong that i lifted the tape from the glass plate when removing the parts.
Edit 2016/06/26: Added the model "neato_wheel_tyre_climber_V2" for better climbing
If necessary, use some drops of super glue to fix the tires on the rims or scale the tires to 99%. I didn't need glue. The tires are sitting tight on the rims with 100% scale.
Designed with FreeCAD
in the same manner as loubie (https://www.thingiverse.com/thing:1350837) I found out that hundreds of models from thingiverse are sold on ebay ignoring the CC license the models were shared with here. https://www.ebay.com/str/3D-Pyro-Prints
The Vero-Team from ebay does neither accept thingiverse or makerbot as a legal corporation nor the CC-license as a justiciable license.
Thingiverse itself also declines to give the members support to enforce the rules of the CC and recommends only to continue the ridiculous and useless dialog with the vero-team and the parasitive sellers or to contract a own lawyer to stop this sellers.
In fact the CC is not worth the click to select the right type for the shared models.
So I'm forced to remove all my models here. I'm not willing to waste my spare time for the profit of these antisocial parasites.
If you are interested to get the models files contact me please. If you are an active member here and shared own models here I would be very glad to send you the files.