Customizable PSU bracket
by rmoro, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
I evaluated different PSU mounting brackets and found http://www.thingiverse.com/thing:1636876 to be a simple and elegant solution. The thing is: it does not fit my PSU. I decided to create a customizable version so everybody can now make a pair for their specific PSU. To make the brackets fit your PSU, measure the following values and enter them in the customizer:
- the distance between the mounting holes on the PSU;
- the diameter of the PSU and frame bolts.
Open the customizer by clicking the the Customize-button, then launch the customizer app. Edit the other values in the customizer when needed. Print two with a higher infill like 30% or 40%. First mount the brackets to the frame. I used M5 post assembly T-nuts for that (check the photo's). After that mount the PSU.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingTools and Utilities
Repair, slice, or enhance this Thing
Customizable PSU bracket by rmoro is licensed under the Creative Commons - Attribution - Non-Commercial license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is not allowed.
Show Some Love
Say thanks by giving rmoro a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure rmoro would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).