This is a combination stand for iPhone and Applewatch with their chargers.
You can use iPhone 5 and later (with lightning connector) with its case (less than 2 mm thickness).
You need to prepare Apple's standard lightning cable, and magnetic charger for AppleWatch, because the shape and size is different from them by 3rd parties.
Also you need bit glue to fix the lightning cable, but nothing to fix the magnetic charger.
0.3 mm nozzle/ 0.18 mm layer
I am using DaVinci 1.0 3D printer by XYZ printing. Also it is modified to a RepRap machine, and I am using Simplify3D to slice models.
nozzle diameter is 0.3mm and Layer pitch is 0.18mm.
Head speed is 1200mm/min
Bottom layer is 4, side is 3 and top is 5.
No raft, with stick paste(Tombow, Shiwanashi PIT).
660 minutes to print. 30 minutes for shaping and constructing.
20m for ABS.
1. weight (4 pcs)
lead weight for car wheel, 20_30_3mm
2. non-slip sheet
to fix the stand on smooth surcface like table