Replicator 2 Flexion Extruder Fan Mount
by LKM, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
Unless you have a really good reason for using this particular version of this model, please consider using Prot0typ1cal's remix, which improves upon this version in pretty much every way imaginable. Get it at:
After installing a Flexion extruder on a Replicator 2, the fan duct mount no longer fits. The top of the extruder bumps against the plastic roof, and the right side of the roof covers the Flexion's dial. This fan duct mount fits on top of the Flexion, and leaves the top of the extruder accessible.
There are holes through the top of the duct mount that allow you to easily access the small hex screws on the inside of the duct mount (see second photo).
Attach cables with cable binder.
(The first photo shows the 40mm Fan Duct - Replicator 2X installed as well, in case you're wondering what's going on with the fan. Get it at at http://www.thingiverse.com/thing:107080.)
at least 20%, hex
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Replicator 2 Flexion Extruder Fan Mount by LKM is licensed under the Creative Commons - Public Domain Dedication license.
What does this mean?
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving LKM a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure LKM would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).