Beach sandal pendant
by tofuji, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
A school project with Miss Tsuji in Toyo institute of Art.
This is a pendant of beach sandal. Size is 67*33 mm (so roughly 1/4 of real size).
0.3 mm nozzle/ 0.18 mm layer
I am using DaVinci 1.0 3D printer by XYZ printing. Also it is modified to a RepRap machine, and I am using Simplify3D to slice models.
nozzle diameter is 0.3mm and Layer pitch is 0.18mm.
Head speed is 1600mm/min
Bottom layer is 4, side is 3 and top is 5.
No raft, with stick paste(Tombow, Shiwanashi PIT).
500 minutes to print. 60 minutes for shaping and constructing.
11m for ABS.
A ball chain (Stainless steel, 2.4mm wide, 60cm long)
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
Beach sandal pendant by tofuji is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving tofuji a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure tofuji would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).