FT5 - E3D V6 mount with auto level sensor
by Joe558, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
These are designed to replace most of the melamine pieces on the FT5; only the top pieces are kept. This design will allow you to use an e3d v6 hotend with a cooling fan and bed level sensor. I have also included parts without sensor mount and fan mount.
Will fit a 40x20 fan(maybe taller).
Made to use this sensor: https://www.amazon.com/4-8-30V-3-wire-Inductive-Proximity-Sensor/dp/B00979RA1M/ref=redir_mobile_desktop?ie=UTF8&pc_redir=T1&psc=1&redirect=true
And to use this actual E3d Mount, YOU MUST MIRROR THIS MOUNT: http://www.thingiverse.com/thing:1091103
Version 2: http://www.thingiverse.com/thing:1741653
-2x-4x m3 nuts and bolts(length will vary) for the fan in the rear
-2x m3x20 bolts with nuts for mounting fan shroud to the mount.
-2x m3x30 bolts with nuts for sensor.
I printed these in PETG using 75% infill. 5 Shells.
Upgrade this Thing with Thingiverse AppsCustomization
Edit, personalize, or revise this ThingPrint Fulfilment
Order a print of this ThingTools and Utilities
Repair, slice, or enhance this Thing
FT5 - E3D V6 mount with auto level sensor by Joe558 is licensed under the Creative Commons - Attribution license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving Joe558 a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure Joe558 would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).