CR2032 Coin cell holder - Laser Cut 1/8" Acrylic
by paulctan, published
Liked ByView All
Give a Shout Out
If you print this Thing and display it in public proudly give attribution by printing and displaying this tag.Print Thing Tag
CR2032 Coin cell holder holds 15 coin cells.
Laser cut 1/8" Acrylic.
4 - 4-40 x 3/4" screws - McMaster Part# 91772A113
4 - #4 Nylon 1/2" spacer - Digikey Part# 492-1078-ND
Please see our blog at http://exadler.blogspot.com
Laser Cut 1/8" Acrylic using a 45W Full Spectrum Laser. Tapped the lower piece with a 4-40 Tap and assembled the unit
Upgrade this Thing with Thingiverse Apps
CR2032 Coin cell holder - Laser Cut 1/8" Acrylic by paulctan is licensed under the Creative Commons - Attribution - Share Alike license.
What does this mean?
- You must attribute (give credit) to the creator of this Thing.
- You must distribute Remixes under the same license as the original.
- Remixing or Changing this Thing is allowed.
- Commercial use is allowed.
Show Some Love
Say thanks by giving paulctan a tip and help them continue to share amazing Things with the Thingiverse community.Tip Designer
We're sure paulctan would love to see what you've printed. Please document your print and share a Make with the community.
To post a Make simply visit this Thing again and click I Made One to start uploading your photo. It’s even easier to post a Make via the Thingiverse Mobile app (available via Google Play and Apple App Store).